Fluid Components International ST98 Profibus C101-U Module - Manual (Page 6)

DOCUMENT NUMBER
06EN003344
SUBJECT
Users Guide – ST98 Profibus
CAGE CODE
64818
DATE
03/27/03
SECTION PAGE
3 of 3
REVISION
A
NOTICE OF PROPRIETARY RIGHTS: THIS DOCUMENT CONTAINS CONFIDENTIAL TECHNICAL DATA, INCLUDING TRADE SECRETS AND
PROPRIETARY INFORMATION WHICH ARE THE PROPERTY OF FLUID COMPONENTS INTL (FCI)
4.0 ST98 PROFIBUS CONFIGURATION (e.bloxx Module)
To configure the ST98 e.bloxx module for the Profibus master you must first load and
select the modules GSD file. The GSD file for the ST98 with the e.bloxx module is
"GEA6782.gsd" then use your master configuration software to complete the PROFIBUS
configuration. See typical configuration screen for the ST98 with the e.bloxx module.
5.0 ADDITIONAL INFORMATION
For additional information on the ST98 refer to the FCI INSTALLATION, OPERATION
AND MAINTENANCE MANUAL FOR THE Model ST98 Flowmeter Document number
06EN003291.
For additional information on the e.bloxx Profibus Module refer to GANTNER
TECHNOLOGIES E.BLOXX A1-1, A1-4, A1-8 Manual.