American Standard M968757D - Manual (Page 6)

P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
© A m e r i c a n S t a n d a r d I n c . 2 0 0 1
2
3
HOTLINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Weekdays 8:00 a.m. to 7:00 p.m. Eastern Time
Unscrew the HOLDER from the SHOWER ESCUTCHEON. Slip the
SHOWER HOSE through the HOLDER and the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE CONNECTOR.
Pull out the SLEEVE GUARD and HOSE. Unthread the SLEEVE GUARD
from the HOSE END connection. Be careful not to allow the HOSE to
fall back through the SLEEVE.
Thread the SHOWER HOSE onto the HOSE END connection and tighten
securely.
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
SHOWER HOSE
HOSE
HOSE END
SHOWER HOSE
SET SCREW
RUBBER RING
SHOWER ESCUTCHEON
SHOWER
ESCUTCHEON
HOLDER
SEAL WASHER
SEAL WASHER
SLEEVE
GUARD
SLEEVE
SEALANT
HAND SHOWER
HAND SHOWER
HOLDER
SEAL WASHER
INSTALL HANDLE TRIM
INSTALL HAND SHOWER
Turn HANDLE STEM fully clockwise (Tub Filler position).
Place the HANDLE ADAPTER on the HANDLE STEM.
Install the ADAPTER SCREW and tighten securely.
Position LEVER HANDLE and place on ADAPTER. Install
the HANDLE SCREW and tighten securely.
HANDLE
STEM
M 9 6 8 7 6 2
Apply a sealant around the HOSE HOLE.
Thread the SHOWER ESCUTCHEON into the SLEEVE until the ESCUTCHEON
contacts the finished deck.
Loosen the SET SCREW in the SHOWER ESCUTCHEON and rotate the
ESCUTCHEON towards the center of the tub. Retighten the SET SCREW.
Thread the HOLDER into the SHOWER ESCUTCHEON.
Insert a SEAL WASHER into the SHOWER HOSE
connector and connect the HAND SHOWER.
Place the HAND SHOWER into the HOLDER.
SLEEVE
METAL
LEVER
HANDLE
ADAPTER
SCREW
HANDLE
SCREW
ADAPTER