Grace Digital GDI-IRA500 Solo - Manual (Page 14)

14
Initializing
Network
After a few seconds, the screen will change to show:
Scan for networks
Enter network
View Config
Edit Config
Step 2 - Scan for a wireless network connection
When the display shows brackets next to the words <Scan for networks>, press the ‘Select’ dial.
(NOTE: IF you make an error at any point, press the ‘Back’ button to return the previous screen)
The SOLO will now scan for all available wireless networks and will display:
Scanning
IIIIIIIIIIIIIIIIIII
IF the radio does not find a wireless network router, the display will show:
No networks
Found
If this happens after subsequent attempts you should check the status of your Wi-Fi router - see the
instructions supplied with your wireless router / modem or contact the person who set up your home
computer network.
When the SOLO finds your wireless network, the display will show the SSID (the name of your home
wireless network) - this is the name ascribed to your Wi-Fi router by the person who set up your network
- for example:
< My Home Network >