Grace Digital GDI-IRA500 Solo - Manual (Page 15)

15
It is possible, and in some locations likely, that your radio will find more than one wireless network, in
which case you can choose the wireless (Wi-Fi) network you want to connect to. Turn the dial on your
radio until the name of the wireless network has brackets {} next to the name of the network you want to
connect to.
For optimal performance you may want to check your home network settings to make sure your radio is
on a deferent channel than your neighbors. To do this please consult your Wi-Fi router owner’s manual.
Step 3 - Connect to the wireless network
When the SSID for the Wi-Fi router you want to connect to is displayed on the screen, press the large
dial inward.
IF your network is not configured to require an encryption code, the screen should display:
Connecting to
Network
then:
Network OK
IF the screen displays either WEP or WPA, a password is required:
Enter WEP key
OR
Enter WPA key
Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi
Protected Access (WPA or WPA2). You therefore need to enter the correct WEP or WPA password on