Grace Digital GDI-BTSP200 BT Speakers - Manual (Page 4)

CONNECTIONS & OPERATION
_________________________________________________________________________
CONNECTIONS
_____________________________________________________________________________
Audio can be played using a Bluetooth® wireless technology music connection or a wired audio music connection
Bluetooth® & Wireless Audio Connection
STEPS:
1. Turn on the main AC power using the power switch at the back of the speaker.
NOTE: system remembers the previously used playback volume setting
2. The Bluetooth LED will light up in blue and initiates pairing (connection) in approximately 3
seconds.
The Bluetooth LED blinks rapidly between red & blue to indicate pairing in progress.
NOTE: Bluetooth mode is the default source selection
3. Select “Grace Digital” from the Bluetooth selections on your Bluetooth playback device /
Smartphone .
Once the System is successfully paired with your Bluetooth device the Bluetooth LED
will blink one time approximately every 5 seconds
NOTE: pairing steps may differ depending on the Bluetooth device you are using.