Grace Digital GDI-BTPB300 3play Quick Start Guide - Manual (Page 13)

5.1 Multiple connections
Your 3play Bluetooth Audio Receiver can have up to 3 devices connected simultaneously. To
connect a second or a third device to 3play, follow the steps below:
1) Double-click the MFB button to put 3play into in Pairing/Discoverable mode for a second
or third device. The top blue and red LEDs will blink and one of the available front LEDs
will blink. 3play will play a short tone.
2) On your Apple iOS or Android device, go to Settings -> Bluetooth and follow the previous
section to pair and connect your device to 3play.
3) Once your second or third device is connected, the top blue LEDs turn solid blue and the
front LED’s turns into solid blue. 3play will play a short tone.
Note:
● When three devices are connected, the top blue LEDs will go off indicating that no more
devices can be connected. Double-clicking will not put 3play in Pairing/Discoverable mode.
5.2 Music Streaming Switches Between Connected Devices
When 3play has more than one device connected, you can switch music streaming from one
connected device to another connected device without having to disconnect any of them, as shown
in the following diagram.
5. Playing Music with Multiple Connections
12