Grace Digital GDI-BTPB300 3play Quick Start Guide - Manual (Page 5)

3.1 Connecting Your 3play
1) Connect your 3play to a speaker or an audio system with the supplied 3.5mm audio cable
Note:
● If your audio system has a digital input (Toslink), you can use a 3.5mm to Toslink
cable (not supplied) for the connection
● If your speaker or your audio system has RCA input, you can use a RCA adapter
cable (not supplied) for the connection
2) Plug one end of the supplied USB cable into the supplied AC charger and then plug the
other end of the cable into the micro USB port of your 3play.
3. Setting Up Your 3play Bluetooth Audio Receiver
4