Grace Digital GDI-BTPB300 3play Quick Start Guide - Manual (Page 3)

waiting for traffic lights. Route all the cables connected to this product properly so that they
will not interfere with your driving.
● Please retain these safety instructions for future reference.
● Do NOT open to repair. A qualified technician must carry out repair work. All servicing
should be referred to qualified service personnel at www.gracesupport.com .
● Do NOT dispose this product in a landfill. Contact Grace Digital at
http://www.gracesupport.com/ or a certified recycling agent to dispose of the product.
2.1 About Your 3play Bluetooth Audio Receiver
3play is a Bluetooth audio receiver that can be plugged in to any stereo system or speakers using
a 3.5mm analogue, or Toslink digital (SPDIF) cable. It can connect to up to 3 devices
simultaneously. 3play is powered by aptX ®codec technology that enables high-quality audio
over Bluetooth.
Other Bluetooth receivers only allow one device to be connected to the receiver at a time. 3play
allows you to connect 3 Bluetooth enabled devices, and receive music from each one of them
without the need to reconnect. It will switch the music streams automatically when a new device
starts playing music, and pause playing music on the previously playing device.
With 3play, you and your friends will be connected and ready to play music. As soon as you press
PLAY, your phone’s music comes out from the speakers. You don't need others to PAUSE, and
you don't need to disconnect and reconnect which takes a lot of time and causes awkward silences.
2. Product Features
2