CAME Rbm84 - Manual (Page 19)

cap. < 2 > pag. < 4 >
ITALIANO
Software - SYSTEM CONFIGURATION
Cap 2
In the PC30 configuration screen, you must select the PC’s port connection which
connects PC30 (normally COM1).
Caution! This operation should be performed before starting any programming
and/or configuration operation described in the following pages or in later sections, otherwise every
software request for
updating and/or saving will elicit a COMMUNICATION ERROR.
PC30 Confi guration
RBM84 -Software
1
2
3
When the window is
opened, it shows the list of
the COM available on the
PC