Software - configuration users, Adding a given number of users (new sequence) – CAME Rbm84 User Manual
Page 59
cap. <
4
> pag. <
15
>
ENGLISCH
Software - CONFIGURATION USERS
Cap 4
This procedure adds any number of users (up to the maximum number allowed by the system)
with the same characteristics of code type (Keyboard, Radio-control or Card), access type and group
belonging.
It is therefore necessary to confi gure a user with the desired characteristics, through the
PERSONALISED, CODE and ACCESS dialogs, so as to then return to PERSONALISED and start up
the procedure.
Click on [NEW(it is not necessary to complete the data in this phase) ...
... go to the CODE dialog and save a user code type
...
... go to the ACCESS dialog and save an access type
...
... then click on the [NEW SEQUENCE] button ...
If a new user is not saved, the procedure will repeat the last user entered (in the example
user 007), applying the same sensor type characteristics.
Adding a GIVEN NUMBER OF USERS (New Sequence)
RBM 84 -Software
2
3
1
4
to adjourn