CAME Rbm84 - Manual (Page 33)

cap. < 2 > pag. < 18 >
ITALIANO
Software - SYSTEM CONFIGURATION
Cap 2
Click on the [GROUP] button...
... and, in the GROUPS window, tick the user group to associate the device with; then confirm with [OK]
This procedure is not optional and you must assign at least one group; the [ALL] button associates or
dissociates all the user groups from the device.
RBM84 -Software
Associating the sensor to a user group (REM)
The numbers that appear written in BLUE are the
groups enabled, whereas those written in RED
are the disabled ones
to adjourn
Caution! at the end of every group of operations, you must update to make the changes effective