Clear-Com RM-702 - Manual (Page 13)

R M - 7 0 2 T W O - C H A N N E L R E M O T E
2 - 1
INSTALLATION
This section discusses the installation of the RM-702 in an intercom system
including typical applications, overall installation theory, detail of each
connector, and adjustments.
INSTALLATION OVERVIEW
This section describes the Clear-Com concept of intercom line connection.
The following subjects are discussed:
• Intercom line connection
• Line termination
• Station powering
• Cable considerations
INTERCOM LINE CONNECTION
The RM-702 provides male and female XLR-3 connectors for each intercom
line, which are looped through.
CONNECTING OR ISOLATING RM-702
CHANNELS
An internal jumper in the RM-702 unit allows you to defeat the
power-channel isolation of the unit, as described in the following procedure.
Note: This adjustment should only be carried out by qualified service
personnel.