1 conditions that cause an alarm, 2 main alarm light, Conditions that cause an alarm – Clear-Com HX System Frames User Manual

Page 67: Main alarm light

Advertising
background image


5.7.1 Conditions that cause an alarm

The following conditions trigger an alarm:

• If any of the voltages produced by the first power supply unit fall below normal levels.

• If any of the voltages produced by the second power supply unit fall below normal

levels.

• If an internal matrix alarm condition activates a matrix relay to turn on an external

alarm.

• If the active CPU card exceeds a temperature threshold.

• If either of the CPU cards is removed from the matrix.

• If either of the matrix’s two cooling fans stop operating.

• If the temperature inside the Eclipse matrix exceeds a set threshold.

5.7.2 Main alarm light

An alarm condition triggers the following events:

• The

red

main alarm light flashes.

• The matrix’s internal alarm buzzer sounds.

Any installed alarm relay outputs switch to active (the normally open contact closes and the
normally closed contact opens). When the alarm relay activates, it can cause an externally
connected device like a light or buzzer to switch on.

One of the six auxiliary

red

alarm lights may go on, to more precisely indicate the source

of the alarm condition (see 5.7.4

Auxiliary alarm lights

).

67

Eclipse HX-Median User Guide

Advertising
This manual is related to the following products: