Clear-Com HX System Frames Instruction Manuals and User Guides
We have 10 Instruction Manuals and User Guides for HX System Frames Clear-Com
Manuals
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 86 |
| Size: | 1.85 MB |
Show table of contents
Read manual
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Installation Overview
- 4 Locating System Components
- 5 Powering System Components
- 6 Wiring System Components
- 6.1 Using RJ-45 connectors
- 6.2 Connecting the matrix frame to a PC running EHX
- 6.3 Connecting the matrix frame to an Ethernet network
- 6.4 Connecting the matrix frame to a PC running Production Maestro Pro
- 6.5 Connecting the matrix frame to user panels
- 6.6 General Purpose Outputs (GPOs)
- 6.7 General Purpose Inputs (GPIs)
- 6.8 E & M signalling with an E-QUE E1 / T1 interface card
- 6.9 Connecting the matrix frame to an external alarm
- 6.10 Connecting to a four-wire audio device
- 6.11 Connecting to interface modules
- 6.11.1 Wiring schemes for the FOR-22 interface module
- 6.11.2 Wiring schemes for the CCI-22 interface module
- 6.11.3 Wiring for Clear-Com analog partyline systems (including Encore)
- 6.11.4 Wiring schemes for TEL-14 interface modules
- 6.11.5 Wiring scheme for the RLY-6 interface module
- 6.11.6 Wiring schemes for a GPI-6 Interface module
- 7 Connecting Matrix Frames
- 8 Glossary
| Recognized languages: | English |
|---|---|
| Pages: | 4 |
| Size: | 185 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 70 |
| Size: | 1.45 MB |
Show table of contents
Read manual
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Overview
- 4 Installing the Eclipse HX-PiCo
- 4.1 Preparing to install the Eclipse HX-PiCo
- 4.2 Installing the Eclipse HX-PiCo
- 4.3 Connecting the Eclipse HX-PiCo to external devices
- 4.4 Connecting user panels and interface modules
- 4.5 Wiring schemes
- 4.5.1 4-Pair analog
- 4.5.2 2-Pair analog
- 4.5.3 Single-Pair Digital
- 4.5.4 Connections using General-Purpose Outputs
- 4.5.5 Connections using General-Purpose Inputs (GPIs)
- 4.5.6 Connecting to a GPI/RLY Interface
- 4.5.7 Connecting to another Eclipse HX-PiCo (PiCo-Link)
- 4.5.8 Connecting to a LAN (Local Area Network)
- 4.6 Connecting to an external PC running EHX
- 5 Using the Eclipse HX-PiCo
- 5.1 Accessing the Eclipse HX-PiCo menu system
- 5.2 Checking port status
- 5.3 Adjusting audio levels
- 5.4 Creating audio routes
- 5.5 Selecting and activating a configuration map
- 5.6 Setting the IP address for the Eclipse HX-PiCo
- 5.7 Accessing system information
- 5.8 Accessing system status
- 5.9 Selecting a source of Identification Tone
- 5.10 Resetting the system
- 5.11 Checking the status of General Purpose Inputs (GPIs)
- 5.12 Checking the status of General Purpose Outputs (GPOs)
- 6 Maintaining the Eclipse HX-PiCo
- 7 Specifications
- 8 Menu Map for the Eclipse HX-PiCo
- 9 Glossary
| Recognized languages: | English |
|---|---|
| Pages: | 290 |
| Size: | 8.27 MB |
Show table of contents
Read manual
Document Outline
- Document Reference
- Contents
- 1 Introduction to EHX
- 2 Getting started: installing, starting and exiting EHX
- 3 EHX: setting up a system
- 3.1 Introduction
- 3.2 Matrix ethernet operation
- 3.3 Selecting ethernet or serial connection
- 3.4 Creating a project file
- 3.5 Setting up a new matrix
- 3.5.1 Adding an offline matrix
- 3.5.2 Adding a discovered matrix
- 3.5.3 Matrix preferences menu
- 3.5.4 Configuration options
- 3.5.5 Firmware options
- 3.5.6 Delete matrix from project
- 3.5.7 Apply changes to matrix
- 4 Managing configurations and users
- 4.1 Introduction
- 4.1.1 Creating a new project
- 4.1.2 Opening a project
- 4.1.3 Closing a project
- 4.1.4 Importing and exporting a project
- 4.1.5 Saving a project
- 4.1.6 Deleting a project
- 4.1.7 Importing/exporting configuration keysets
- 4.1.8 User management
- 4.1.9 Creating a new EHX user
- 4.1.10 Editing an existing EHX user
- 4.1.11 Deleting a user
- 4.2 The EHX screen after a project has been loaded
- 4.1 Introduction
- 5 Configuring the Eclipse HX system
- 5.1 Using the left pane EHX menus
- 5.2 Matrix hardware
- 5.3 Fonts
- 5.4 System configuration limits
- 5.5 Online
- 5.6 Matrix hardware setup
- 5.7 Adding an MVX-A16 card
- 5.8 Removing an MVX-A16 card
- 5.9 Upgrading the MVX-A16 cards
- 5.10 Port list options
- 5.11 Show all ports
- 5.12 Detect new hardware
- 5.13 Show Alt Text
- 5.14 Port number
- 5.15 Port function
- 5.16 Summary of expansion panels
- 5.17 Label
- 5.18 Description
- 5.19 Sorting ports
- 5.20 Column/row resizing
- 5.21 Port properties
- 5.21.1 Assignment panel (AP) panel options
- 5.21.2 Auxiliary relay options
- 5.21.3 Basic options
- 5.21.4 Panel options
- Reply tally auto clear time
- Display brightness
- Display dim timer
- Eavesdropping (privacy)
- Expansion panels
- Headset mic type
- Headset PTT function
- Headset LS cut
- Listen again auto delete
- Mute relay
- Nearby panel partial
- Page override allowed
- Page gain
- Gooseneck mic type
- Panel text orientation
- Line release
- Screen saver timer
- Applies to:
- 5.21.5 IP port options
- 5.21.6 Assignment panel options
- 5.21.7 Menu options
- 5.21.8 Voice operated switch
- 5.21.9 Global options
- 5.21.10 Gain options
- 5.21.11 Audible alert options
- 5.21.12 Tally options
- 5.21.13 Fast key assign options
- 5.21.14 Logic input options
- 5.21.15 Attached control options
- 5.21.16 DTMF options
- 5.22 General Purpose Inputs (GPIs)
- 5.23 General Purpose Outputs (GPOs)
- 5.24 Configuring the E-FIB fiber card
- 5.25 Configuring the E-Que card
- 5.26 E1 direct
- 5.27 T1 direct
- 5.28 E1 trunk
- 5.29 T1 trunk
- 5.30 E1 direct/trunk
- 5.31 T1 direct/trunk
- 5.32 E-QUE antenna
- 5.33 E-QUE splitter
- 5.34 Removing an E-Que card
- 5.35 Configuring an E-Que card for antenna
- 5.36 Splitter connections
- 5.37 Antenna role map
- 5.38 E-Que trunk basic settings
- 5.39 Configuring the IVC-32 card
- 5.40 Adding an IVC-32 card
- 5.41 Configuring an IVC-32 redundant card
- 5.42 Configuring the LMC-64 card
- 5.43 Configuring the E-MADI64 card
- 5.44 Fixed groups
- 5.45 Fixed group tallies
- 5.46 Sort groups
- 5.47 Key groups
- 5.48 Partylines
- 5.49 Routes
- 5.50 Speed dials
- 5.51 Controls
- 5.52 Logic Maestro
- 5.53 Beltpacks
- 6 IP devices
- 7 Panel programming
- 7.1 The panel programming screen
- 7.2 V-series panel programming
- 7.3 Concert panel programming
- 7.4 Concert panel options
- 7.5 I-Series programming
- 7.6 I-Series panel options
- 7.7 Fast key assign restrictions (I-series)
- 7.8 Setting up assignment panel partyline membership options
- 7.9 Setting up assignment panel fixed group membership options
- 7.10 General panel setups
- 7.11 Local advanced
- 8 Audio Mixer
- 9 Online mode
- 10 Networking
- 11 Client server
- 12 Eclipse HX downloads
- 13 Using the diagnostic tools
- 14 Glossary
- 15 Limited Warranty
- 16 Technical Support & Repair Policy
| Recognized languages: | English |
|---|---|
| Pages: | 143 |
| Size: | 2.52 MB |
Show table of contents
Read manual
Document Outline
- Document Reference
- Contents
- 1 Important Safety Instructions
- Safety symbols
- Mains power cord
- 2 Introduction
- 3 Overview
- 4 Installing the Eclipse HX-Delta
- Clear-Com recommends the use of shielded cable.
- 5 Using the Eclipse HX-Delta
- 6 E-MADI64 card
- 7 E-FIB fiber card
- 8 E-QUE E1/T1 card
- 9 IVC-32 card for IP-based connections
- 10 LMC-64 metering card
- 11 Maintaining the Eclipse HX-Delta
- 12 Specifications
- 12.1 Matrix capabilities
- 12.2 Mechanical
- 12.3 Environmental
- 12.4 Matrix performance
- 12.5 E-MADI64 interface front card
- 12.6 E-MADI64 interface rear card
- 12.7 E-MADI64 fiber cable
- 12.8 E-MADI64 fiber transceiver
- 12.9 E-MADI64 clock sources
- 12.10 E-FIB fiber interface front card
- 12.11 E-FIB Fiber interface rear card
- 12.12 Fiber cable
- 12.13 Fiber transceiver
- 12.14 E-QUE interface front card
- 12.15 E-QUE interface rear card
- 12.16 IVC-32 interface front card
- 12.17 IVC-32 interface rear card
- 12.18 LMC-64 interface front card
- 12.19 LMC-64 interface rear card
- 12.20 MVX-A16 analog interface card
- 12.21 Data interface: 16 bi-directional
- 12.22 Backplane connector: FCI/BERG Metral
- 12.23 System programming
- 12.24 Minimum PC requirements (for EHX software)
- 12.25 Recommended PC requirements (for EHX software)
- 12.26 External power supply units
- 13 Glossary
| Recognized languages: | English |
|---|---|
| Pages: | 145 |
| Size: | 2.88 MB |
Show table of contents
Read manual
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Overview
- 4 Installing the Eclipse HX-Median
- 4.1 Before you begin the installation
- 4.2 Installing the Eclipse HX-Median
- 4.3 Installing CPU cards
- 4.4 Installing interface cards
- 4.4.1 Installing an interface card to the matrix frame
- 4.4.2 Removing an interface card from the matrix frame
- 4.4.3 Combining interface cards in the frame
- 4.4.4 Static sensitivity
- 4.4.5 Hot patching (hot plugging)
- 4.4.6 Analog port numbering
- 4.4.7 Configuration
- 4.4.8 Checking MVX-A16 analog port card installation
- 4.5 Wiring audio devices to the matrix frame
- 4.6 Wiring panels to the matrix frame
- 4.7 Wiring CPU card interfaces
- 4.8 DSE1/T1 Matrix to Matrix crossover cable connections
- 4.9 E1/T1 Matrix to Matrix straight cable connections
- 4.10 E1 to FreeSpeak / CellCom antenna straight cable connection
- 5 Using the Eclipse HX-Median
- 5.1 Creating and storing system configurations
- 5.2 Setting the default IP Address
- 5.3 Using the CPU card Ethernet ports
- 5.4 CPU card fail-safes
- 5.5 CPU card lights and controls
- 5.6 MVX-A16 analog card front-panel lights and controls
- 5.7 Diagnosing power supply problems
- 5.8 Connecting the matrix frame
- 6 E-MADI64 card
- 7 E-FIB fiber card
- 8 E-QUE E1/T1 card
- 9 IVC-32 card for IP-based connections
- 10 LMC-64 metering card
- 11 Maintaining the Eclipse HX-Median
- 12 Specifications
- 12.1 Matrix frame capabilities
- 12.2 Mechanical
- 12.3 Environmental
- 12.4 Matrix frame performance
- 12.5 E-MADI64 interface front card
- 12.6 E-MADI64 interface rear card
- 12.7 E-MADI64 fiber cable
- 12.8 E-MADI64 fiber transceiver
- 12.9 E-MADI64 clock sources
- 12.10 Fiber interface front card
- 12.11 Fiber interface rear card
- 12.12 Fiber cable
- 12.13 Fiber transceiver
- 12.14 E-QUE interface front card
- 12.15 E-QUE interface rear card
- 12.16 IVC-32 interface front card
- 12.17 IVC-32 interface rear card
- 12.18 LMC-64 interface front card
- 12.19 LMC-64 interface rear card
- 12.20 Analog port card (MVX-A16)
- 12.21 Data interface: 16 bi-directional
- 12.22 Backplane connector: FCI/BERG Metral
- 12.23 System programming
- 12.24 Minimum PC requirements (for EHX software)
- 12.25 Recommended PC requirements (for EHX software)
- 12.26 Power supply unit
- 13 Glossary
| Recognized languages: | English |
|---|---|
| Pages: | 186 |
| Size: | 8.36 MB |
Show table of contents
Read manual
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Quick reference: Upgrading to Eclipse HX v7.5
- 4 Upgrading to Eclipse HX v7.5
- 5 Upgrading the CPU cards
- 5.1 Changing the CPU card PROM
- 5.2 Changing the CPU card RAM
- 5.3 Changing the CPU card DIP switches
- 5.4 Upgrading the CPU card application code
- 5.5 Setting the matrix type
- 5.6 Checking the CPU card application code version
- 5.7 Upgrading CPU Card U53 CPLD
- 5.8 Upgrading CPU Card U1 CPLD
- 5.9 Upgrading the CPU card U53 CPLD code with Xilinx tools
- 5.10 Upgrading the CPU card U1 CPLD code with Xilinx tools
- 5.11 Downloading a test configuration to the CPU card using EHX
- 5.12 Forcing the CPU card to the factory default IP address
- 6 Upgrading the Eclipse HX-PiCo
- 6.1 Changing the Eclipse HX-PiCo PROM
- 6.2 Changing the Eclipse HX-PiCo RAM
- 6.3 Changing the Eclipse HX-PiCo DIP switches
- 6.4 Upgrading the Eclipse HX-PiCo application code
- 6.5 Upgrading the Eclipse HX-PiCo MVX code
- 6.6 Checking the Eclipse HX-PiCo application code and MVX code versions
- 6.7 Upgrading the Eclipse HX-PiCo CPLD and FPGA code with Xilinx tools
- 6.8 Download a test configuration into the Eclipse HX-PiCo using EHX
- 6.9 Forcing the Eclipse HX-PiCo to the factory default IP address
- 7 Upgrading the MVX-A16 card
- 8 Upgrading E-FIB cards
- 9 Upgrading E-QUE cards
- 10 Upgrading IVC-32 and LMC-64 cards
- 11 Upgrading E-MADI64 cards
- 12 Upgrading CellCom / FreeSpeak wireless systems
- 13 Upgrading panels
- 14 Upgrading the TEL-14 module
- 15 Upgrading the AES-6 module
- Appendix A: CPU card layout
- Appendix B: CPU card DIP switches
- Appendix C: PiCo card layout
- Appendix D: Eclipse HX-PiCo CPU DIP switches
- Appendix E: Hitachi Renesas Flash Development Tool
- Appendix F: TFTPUtil
- Appendix G: Tera Term
- Appendix H: Flash Magic
- Appendix I: I-Series converter cable wiring and rear panel layouts
- Appendix J: Xilinx tools
- Appendix K: Clear-Com® End User Software License
| Recognized languages: | English |
|---|---|
| Pages: | 145 |
| Size: | 2.74 MB |
Show table of contents
Read manual
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Overview
- 4 Installing the Eclipse HX-Omega
- 4.1 Before you begin the installation
- 4.2 Installing the Eclipse HX-Omega
- 4.3 Installing CPU cards
- 4.4 Installing interface cards
- 4.5 Wiring audio devices to the matrix
- 4.6 Wiring panels to the matrix
- 4.7 Wiring CPU card interfaces
- 4.8 DSE1/T1 Matrix to Matrix crossover cable connections
- 4.9 E1/T1 Matrix to Matrix straight cable connections
- 4.10 E1 to FreeSpeak / CellCom antenna straight cable connection
- 5 Using the Eclipse HX-Omega
- 5.1 Creating and storing system configurations
- 5.2 Setting the default IP Address
- 5.3 Using the CPU card Ethernet ports
- 5.4 CPU card fail-safes
- 5.5 CPU card lights and controls
- 5.6 Analog port card (MVX-A16) front-panel lights and controls
- 5.7 Power supplies
- 5.8 Diagnosing power supply problems
- 5.9 Connecting the matrix
- 6 E-MADI64 card
- 7 E-FIB fiber card
- 8 E-QUE E1 / T1 card
- 8.1 Supported FreeSpeak / CellCom connection options
- 8.2 Supported direct and trunk connections (using the E1 and T1 protocols)
- 8.3 E-QUE front panel lights and controls
- 8.4 E-QUE rear panel connectors
- 8.5 Synchronization
- 8.6 E-QUE interface applications
- 8.7 E1 Trunk and Direct Modes
- 8.8 T1 Trunking
- 8.9 Trunking failover
- 9 IVC-32 card for IP-based connections
- 10 LMC-64 metering card
- 11 Maintaining the Eclipse HX-Omega
- 12 Specifications
- 12.1 Matrix capabilities
- 12.2 Mechanical
- 12.3 Environmental
- 12.4 Matrix performance
- 12.5 E-MADI64 interface front card
- 12.6 E-MADI64 interface rear card
- 12.7 E-MADI64 fiber cable
- 12.8 E-MADI64 fiber transceiver
- 12.9 E-MADI64 clock sources
- 12.10 Fiber interface front card
- 12.11 Fiber interface rear card
- 12.12 Fiber cable
- 12.13 Fiber transceiver
- 12.14 E-QUE interface front card
- 12.15 E-QUE interface rear card
- 12.16 IVC-32 interface front card
- 12.17 IVC-32 interface rear card
- 12.18 LMC-64 interface front card
- 12.19 LMC-64 interface rear card
- 12.20 Analog port card (MVX-A16)
- 12.21 Data interface: 16 bi-directional
- 12.22 Backplane connector: FCI/BERG Metral
- 12.23 System programming
- 12.24 Minimum PC requirements (for EHX software)
- 12.25 Recommended PC requirements (for EHX software)
- 12.26 Power supply unit
- 13 Glossary
| Recognized languages: | English |
|---|---|
| Pages: | 2 |
| Size: | 167 KB |