Panel menu access code, Features passcode, Wireless beltpacks – Clear-Com HX System Frames User Manual
Page 49
Figure 3-20 Example DTMF Passcodes
Panel Menu Access Code
You can PIN-code protect the menus on V-Series main panels. Enter the PIN code here.
When users attempt to access PIN-protected menus they must enter this code.
The PIN protected menus on V-Series panels are:
• Sys Config Access
• Local Pref Menu access
• Diagnostic Menu Access
Features Passcode
You can enter a 16 digit passcode to enable Production Maestro to operate with the
matrix.
This passcode is purchased / obtained from Clear-Com. For more information, see your
Clear-Com representative.
Note:
If the passcode is changed an apply and red reset is required to implement the change.
Wireless beltpacks
Use this tab to configure the system identifier and DECT parameters for CellCom /
FreeSpeak wireless beltpacks.
A password is required to access the DECT configuration facility. For more information,
contact your Clear-Com representative.
Figure 3-21 Wireless Beltpacks Tab
49
Eclipse EHX Software User Guide