External ip address, Ip address, Ip port – Clear-Com HX System Frames User Manual
Page 175: Restart blocked connections, 6 ivc-32 card panel list, Ivc-32 card panel list
External IP address
Enable this checkbox to edit the external IP address and port number below the checkbox.
IP address
The external IP address that can be used to communicate directly with the IVC-32 card
itself rather than the matrix via the IVC-32 card. This address is not used by IP panels etc.
IP port
The external IP port used when communicating directly with the IVC-32 card using the
external IP address.
1)
When the edits are complete click on the tick button to save the changes.
Alternatively click on the cross button to discard the changes. As soon as the
changes are confirmed EHX sends them to the IVC-32 card.
Restart blocked connections
The Restart Blocked Connections button at the bottom of the Diagnostics screen is
used to restart a call initiated using IP directs and trunks. For more information, see 10.2. 3
IP directs and trunks.
6.6
IVC-32 card panel list
1)
To display a list of the panels connected to the IP ports on the IVC-32 card, click
on the right button.
175
Eclipse EHX Software User Guide