Clear-Com HX System Frames - Manual (Page 162)

Figure 5-59 Beltpack Key Assignment Menu
The activation options are: Talk, Listen, Talk and Listen, Talk and Forced Listen or Dual
Talk and Listen.
• Talk sets a talk from the beltpack to a destination with no automatic listen to the
destination.
• Listen sets a key to listen to the source without talking to the destination at the
same time. Use as a monitor key (press the volume level up/down buttons under
the display to increase listen level).
• Talk and Listen sets a talk key with listen (press the volume level up/down buttons
under the display to increase or mute the listen level).
• Talk and Forced Listen sets a talk key with permanently made listen (press the
volume level up/down buttons under the display to increase or mute the listen
level).
• Dual talk and Listen sets a Dual talk and listen key. This makes the pushbutton
activate a Talk and Listen on a press and hold or latch a Listen with a short press
and release (less than 200ms) on the same pushbutton.
162 Eclipse EHX Software User Guide