Clear-Com HX System Frames - Manual (Page 208)

7.6.7 Audio mixer
1) Select Audio Mixer to display the audio mixer panel that allows the levels of
individual crosspoints to be adjusted interactively. This facility can only be used
with V-Series panels.
7.6.8 Identify panel
1) Selecting Identify Panel on the panel programming toolbar to cause the panel
currently being edited to flash the panel buttons or LEDs red and display
IDENTIFYME
in the bottom left display. This facility is only available for V-Series
panels. The Identify Panel button is greyed out for other panel types.
7.7 Fast key assign restrictions (I-series)
The I-Series Advanced Settings area, located on the rightmost side of Cards and Ports
offers three Soft Menu Restrictions:
• Dial Phone Mode Access
• Information Mode Access
• Key Assign Mode Access
By default the panel operator has access to these options from an I-Series, but if the check
box for any of these options is cleared, the panel operator cannot access the menus from
the I-Series front panel.
7.8 Setting up assignment panel partyline membership
options
The panel operator can add and remove members of a partyline in real time from an
assignment panel provided this feature has been enabled for the panel in EHX.
To enable this feature in EHX
1) Open the required map configuration in EHX.
2) From the Cards and Ports screen, select the desired panel.
3) From Port Properties, select Partyline Assignment from AP Panel Options. Click
the drop-down box to turn the feature on or off.
• When the check box reads true the feature is on.
• When the check box reads false the feature is off.
4) From Panels in the Configuration menu select the required panel or the panel to
which the AP22 is connected.
5) Assign the partyline as a talk key on the on panel.
6) Assign potential partyline members as listen keys on the on screen panel.
208 Eclipse EHX Software User Guide