Clear-Com HX System Frames - Manual (Page 137)

3) To remove items from the sort group select the item in the Attached window and
click on the < symbol in the center partition to move the item back to the
Available window.
The # button on the Available and Attached panes sorts the members by port
number in ascending or descending order, preceded by non-port items such as
controls.
The Label button sorts the members by name alphabetically and the Description
button sorts the members alphabetically by description.
The tabs above the Available and Attached panes filter the members by type.
4) To set the properties of the sort group open the Basic Settings menu in the
Properties window (top right).
5.46.1 Basic options
Description
Enter an optional description for the sort group such as function.
Engineer comments
A scratchpad for engineers to record any relevant information about the sort group.
Listen label
The listen label that is available for panel configuration.
Talk label
The talk label specified for use in the panel configuration table.
5.47 Key groups
Key Groups provide a way of assigning a label to keys on multiple panels in a system or
within a linked set. Once the key group members have been set up using EHX, the target
of the key group can be changed with a single assignment in Production Maestro Pro.
Up to 100 key groups can be set up on a system. Each key group can only be assigned to
a single target such as a partyline (Conference in Production Maestro) or four-wire port
(Four-wire Viewer in Production Maestro Pro) or a panel port.
1) To set up Key Groups select Key Groups in the EHX Setup menu to open the
key groups editor.
137 Eclipse EHX Software User Guide