Clear-Com HX System Frames - Manual (Page 127)

• The Create New Configuration > Discover Hardware right click option is
selected in the relevant Matrix on the System Layout screen.
5.43.2 Adding an E-MADI64 card (manual addition)
To add an E-MADI64 card:
1) In Hardware > Cards and Ports, navigate to an available slot number (marked
Empty). Do either of the following:
• Double click the slot.
• Right click the slot and select Set Card Type.
2) A drop-down menu is displayed, listing the available card types. Select the E-
MADI64 card.
The configurable ports (16, 32, 56, or 64) for the E-MADI64 card are displayed.
Note: A total of four E-QUE, IVC-32 or LMC-64 interface cards may be fitted to an Eclipse HX-
Omega.
Card and port settings
E-MADI64 port number
The port number on the E-MADI64 card. Standard EHX settings (including VOX and In-
use tally) are applicable to all E-MADI64 channels.
E-MADI64 port function
Assign a function to the port from a drop-down menu. Limited to Direct mode only.
E-MADI64 label
The Talk label assigned to the port used to identify the port when configuring talk paths.
E-MADI64 description
An optional description for the port of up to 255 characters long.
E-MADI64 channel labeling
The 4-character channel ID for each MADI input channel is taken from the provided
embedded data bits. The channel ID for each MADI output channel can be enabled in
EHX.
You can do any of the following:
• Use the 4-character, 3rd party ID, provided from the input channel.
• Use the Production Maestro Pro Alias.
• Disable the ID and use the EHX port name for display on EHX Panels.
This means that supported user panels can automatically show:
• The MADI channel ID.
• The Alias as supplied from Production Maestro Pro.
127 Eclipse EHX Software User Guide