1 request info, Matrix overview, Ip address dump – Clear-Com HX System Frames User Manual
Page 271: Network status info, Comms test, Comms test results, Request info
13.2.1
Request info
1)
Select Request Info in the Properties pane to display a Request Matrix
Information screen which allows a number of matrix parameters to be set or
displayed.
Figure 13-7 Request Matrix Information
2)
Select the required function in the left pane and the click on the Send button to
send the request or update.
The default functions are described below.
Matrix overview
1)
Select this option to cause information about the current matrix status to be output
to the matrix event log.
IP address dump
1)
Select this option to output information on the current matrix IP address
information to the event log.
Network status info
1)
Select this option to output the current network status of the matrix to the matrix
event log.
Comms test
1)
Select this option to initiate a network communications test.
Comms test results
1)
Select this option to outputs the results of the last communications test performed
to the matrix event log.
271
Eclipse EHX Software User Guide