Clear-Com HX System Frames - Manual (Page 248)

10.3 Programming remote labels
1) To program remote labels onto panels, open Configuration > Panels.
2) From the Panel Programming area of the screen select the required panel to be
programmed by either selecting the panel from the drop down list or cycling
through the panels by selecting the left or right arrows.
3) To assign keys click on the required item in the list of available labels, drag the
items to the required key and drop them over the display corresponding to the key
and then click on the mouse to confirm the assignment.
4) When the labels have been programmed onto the required panel or panels,
download the changes by selecting the Apply Changes To System link in the
System menu. The newly programmed labels should appear in the required
positions.
5) To program labels onto the next matrix, switch between the configurations by
selecting the required matrix from the layout pane.
10.4 Remote fixed groups
Remote Members from one system can be added to a Fixed Group of a local system.
To configure a remote member to a local Fixed group:
1) Select Fixed Groups from the Configuration menu.
2) Create a Fixed Group by clicking on the New button.
3) Enter the Talk and Listen labels for the new Fixed Group and a description if
required.
4) Set up the properties of the new Fixed Group using the properties dialogue in the
Properties pane.
Figure 10-12 Remote Fixed Groups
248 Eclipse EHX Software User Guide