Clear-Com HX System Frames - Manual (Page 224)

Layout basic settings
This configures the audio mixer for the panel when using the RJ-45 analogue matrix
connection.
Layout basic settings using D25
This configures the audio mixer for use with the analogue RJ-45 and auxiliary audio
connectors.
Layout binaural coax/AES
This configures the audio mixer for use with the AES3 digital option card. The AES3 option
card has both RJ-45 and coax connectors and auto-detects which is in use. This option
applies regardless of which connection on the AES3 card is used.
Layout binaural coax/AES using D25
This configures the audio mixer for use with the AES3 digital option card and the auxiliary
audio connector. The AES3 option card has both RJ-45 and coax connectors and auto-
detects which is in use. This option applies regardless of which connection on the AES3
card is used.
8.2.6 Input area
This area contains a list of all the available audio sources and five columns for processes
that can be applied to the audio before it is sent to the crosspoint audio mixers. Any
processing applied at this point affects the audio supplied to all the downstream mixing.
Audio inputs
The first column in the input area lists all the inputs that may be available in the
configuration. All of the possible inputs are listed below but some inputs may not be
available depending on which input/output interface options have been selected.
HS1 Mic GN
This input takes audio from the headset1 microphone or gooseneck microphone.
HS2 Mic
This input takes audio from the headset2 microphone.
Matrix1
This input takes mono audio from the analogue matrix connection if the Basic Layout is
being used or one channel of stereo audio from the AES3 digital option card if this is fitted.
Matrix2
This input takes a second channel of stereo audio from the AES3 digital option card. This
input is only available if the AES3 digital option is fitted.
Ext1
This input uses the External Input 1 on the auxiliary audio connector.
Ext2
This input uses the External Input 2 on the auxiliary audio connector.
Listen again
This input uses audio from the listen again facility.
224 Eclipse EHX Software User Guide