Clear-Com HX System Frames - Manual (Page 142)

5.48.1 Partyline attached controls
Controls can be attached to partylines that allow a Route, Relay or Speed Dial to be
activated via a secondary action.
1) Open the partyline screen by selecting the Partylines link on the Configuration
menu
2) Create a partyline or select a partyline that was been previously created
3) Expand Attached Control in the Properties window.
4) Select Secondary Action in the Attached Control list.
5) Select the drop down arrow and select the required control.
Figure 5-47 Partyline Attach Control Screen
5.48.2 Partyline basic options
Basic Options displays the fixed information about a partyline and can be used to edit the
partyline description, Talk and Listen Aliases, Talk and Listen labels, and Shared Partyline.
To enable/disable Basic Options
1) Open the Partyline screen by selecting the Partylines link on the Configuration
menu
2) Create a partyline or select a partyline that was been previously created
3) Expand Basic Options in the Properties window.
The Basic Options are:
• Description - description of the partyline to indicate function etc.
• Engineer Comments - engineering information about the partyline.
• Listen Alt Text – the alternative text for the listen label.
142 Eclipse EHX Software User Guide