Clear-Com HX System Frames - Manual (Page 181)

7 Panel programming
From the Panel Programming screen (in the Configuration menu), you can assign talk
and listen labels to panel keys, assign labels to expansion panel keys, configure
assignment panels, stack keys and set key specific functions.
Figure 7-1 Panel Programming Screen
7.1 The panel programming screen
The Panel Programming Screen is split into four areas.
The top area provides scroll arrows and a drop down list of all intercom panels. The top
area also provides access to key Label Options and Local Assignments.
The middle area provides a mimic of the intercom panels and is the area where labels are
programmed onto the panel selectors. Also this area provides access to configure
Expansion Panels to host Panels.
Note: Expansion panels can only be added or removed in Cards and Ports.
The bottom right area provides an area where stacked keys can be configured or specific
key actions can be set. This area can be expanded or collapsed.
The bottom left area provides Palette consisting of a list of all the matrices currently in the
project. Each matrix can be expanded to list all the entities that it contains, such as panels,
interfaces and partylines.
181 Eclipse EHX Software User Guide