5 key assignment, 6 default assignment mode, Key assignment – Clear-Com HX System Frames User Manual
Page 212: Default assignment mode
8)
Select or deselect each option, as required.
9)
Select Apply. You return to the Palette.
7.10.5
Key assignment
You can specify how entities are assigned to panel keys.
1)
Select Configure Palette. The Assign Keys options appear on the lower left of the
screen. The following options are available:
2)
On Double Click - double click an entity to assign it to the first free key on the
panel. To determine the assignment mode, see 7.10.6 Default assignment
mode.
3)
On Right Click Menu - right click an entity to display a menu. The menu displays
the appropriate assignment types for the panel.
4)
On Keyboard Enter - When searching entities, press Enter to assign the first
search result to the first free key on the panel. To determine the assignment
mode, see 7.10.6 Default assignment mode. Select or deselect each option, as
required.
5)
Select Apply. You return to the Palette.
7.10.6
Default assignment mode
This option determines the key type for entities that are assigned to panel keys using:
• Select Unique Search Result
• Assign Keys on Double Click
• Assign Keys on Keyboard Enter
1)
Select Configure Palette.
2)
In the lower left of the screen, select the Default Assignment Mode list.
3)
Select from the following options:
• Talk - sets a talk from the panel to a destination with no automatic listen to the
destination.
• Listen - sets a key to listen to the source without talking to the destination at
the same time.
• Talk and Listen - sets a talk key with listen.
• Dual Talk and Listen - sets a dual talk and listen key (only on pushbutton panel
types). This make the pushbutton activate a TALK on a press and hold and
LISTEN with a short press on the same pushbutton.
• Forced Listen - sets a key with permanently made listen.
• Talk and Forced Listen - sets a talk key with permanently made listen.
4)
Select Apply. You return to the Palette.
212
Eclipse EHX Software User Guide