42 configuring the lmc-64 card, 1 adding an lmc-64 card, Configuring the lmc-64 card – Clear-Com HX System Frames User Manual
Page 124: Adding an lmc-64 card
5.42
Configuring the LMC-64 card
The LMC-64 card is designed to allow Eclipse HX matrices to be provide audio level
metering data to Production Maestro clients over an IP network.
5.42.1
Adding an LMC-64 card
To add an LMC-64 card:
1)
In Hardware > Cards and Ports, navigate to an available slot number (marked
Empty). Do either of the following:
• Double click the slot.
• Right click the slot and select Set Card Type.
2)
A drop-down menu is displayed, listing the available card types. Select the LM64
card.
Figure 5-31 LMC-64 Card Selection
Note:
A total of four E-QUE, IVC-32 or LMC-64 interface cards may be fitted to an Eclipse HX-
Omega.
This action adds an LMC-64 card to be used for communication over IP. Cards and Ports
show a single port entry that can be configured for 16-64 meters.
Figure 5-32 IP Ports
124
Eclipse EHX Software User Guide