Clear-Com HX System Frames User Manual
Eclipse hx-delta user guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Document Reference
- Contents
- 1 Important Safety Instructions
- Safety symbols
- Mains power cord
- 2 Introduction
- 3 Overview
- 4 Installing the Eclipse HX-Delta
- Clear-Com recommends the use of shielded cable.
- 5 Using the Eclipse HX-Delta
- 6 E-MADI64 card
- 7 E-FIB fiber card
- 8 E-QUE E1/T1 card
- 9 IVC-32 card for IP-based connections
- 10 LMC-64 metering card
- 11 Maintaining the Eclipse HX-Delta
- 12 Specifications
- 12.1 Matrix capabilities
- 12.2 Mechanical
- 12.3 Environmental
- 12.4 Matrix performance
- 12.5 E-MADI64 interface front card
- 12.6 E-MADI64 interface rear card
- 12.7 E-MADI64 fiber cable
- 12.8 E-MADI64 fiber transceiver
- 12.9 E-MADI64 clock sources
- 12.10 E-FIB fiber interface front card
- 12.11 E-FIB Fiber interface rear card
- 12.12 Fiber cable
- 12.13 Fiber transceiver
- 12.14 E-QUE interface front card
- 12.15 E-QUE interface rear card
- 12.16 IVC-32 interface front card
- 12.17 IVC-32 interface rear card
- 12.18 LMC-64 interface front card
- 12.19 LMC-64 interface rear card
- 12.20 MVX-A16 analog interface card
- 12.21 Data interface: 16 bi-directional
- 12.22 Backplane connector: FCI/BERG Metral
- 12.23 System programming
- 12.24 Minimum PC requirements (for EHX software)
- 12.25 Recommended PC requirements (for EHX software)
- 12.26 External power supply units
- 13 Glossary