Clear-Com HX System Frames - Manual (Page 21)

User panels Full compatibility with V-Series and I-Series user panels.
VOX The VOX-programmable audio visually cues you at the
matrix when audio transmits at a programmed threshold
on a connected user panel or interface.
EHX configuration software EHX provides an intuitive and visual way to configure the
Eclipse HX matrix system. The Eclipse HX-Delta can
store up to four system configurations.
Table 5: Eclipse HX-Delta features
Ti
p: The number of interface cards that can be fitted to the matrix is limited by port count.
For more information, see 4.4.3 Combining interface cards in the matrix
3.2.6 CPU card
Two CPU cards are fitted to each Eclipse HX-Delta, in a master and slave relationship. The
second CPU card provides redundancy in the case of outages or planned maintenance.
The master CPU card:
• Provides the serial data and Ethernet connection to the connected EHX PC.
• Coordinates the data flow between the other interface cards and modules in the
system, allowing them to communicate with each other.
• Stores up to four complete configurations, enabling the selection and activation of a
configuration directly from the card.
• Includes an additional, embedded configuration, which may be activated from the
card for fast fault checking after the installation or upgrade of the Eclipse HX system.
Tip: A configuration determines the operating parameters of the Eclipse HX matrix system,
including port functions, talk-and-listen audio routes, controls and other functions.
Configurations are created and managed in EHX, for download to the matrices. For more
information about EHX, see 3.5
EHX configuration software .
Note:
The cards slide vertically into the front of the matrix and connect to the backplane.
21 Eclipse HX-Delta User Guide