Clear-Com HX System Frames - Manual (Page 8)

2 Introduction
The Matrix Frame Installation Guide describes the steps required to install
and configure an Eclipse HX matrix system. The Eclipse HX system is a digital point-to-point
intercom platform, designed to seamlessly integrate your entire intercom infrastructure
(digital, wireless, IP-based and analog intercom systems). The system comprises matrix
frames, interface cards and modules, user panels and interface frames.
The system is configured and managed using the highly intuitive software.
The guide:
• Provides information about placing, powering, and wiring the hardware system
components.
• Defines many of the concepts used in the system.
Tip: For more information about , see your EHX documentation, including EHX Help
(integrated with your software).
Servicing instructions are for use by qualified personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that
described by this guide, unless qualified to do so. Refer all servicing to
qualified service personnel.
2.1 Chapters summary
Chapter Summary
3 Installation Overview
Provides a step-by-step installation guide for the
components of the Eclipse matrix system, as received
from the factory.
4 Locating System
Components Describes the environmental / location requirements for
the matrix system components. Includes a summary of
component sizes.
5 Powering System
Components Provides guidelines for providing AC power to the system
and for planning the powering of interface frames.
6 Wiring System
Components Provides an overview of the various wiring systems for
connecting panels and interfaces to the matrix. This
chapter contains reference information to help you wire all
connectors in the Eclipse HX system. Information on
internal jumpers, adjustments, and device specifications
can be found in the individual documentation for each
component.
8 Eclipse HX Matrix Frame Installation Guide