Clear-Com HX System Frames - Manual (Page 51)

4.10 E1 to FreeSpeak / CellCom antenna straight cable
connection
Straight CAT-5 cables are used to connect an E-QUE card to a FreeSpeak / CellCom
antenna or splitter.
The E1 pinout for connecting an antenna or splitter is shown in
Table 9: E1 pinout for connecting a FreeSpeak / CellCom antenna or splitter .
Cable wiring is shown in Table 10: E1 to FreeSpeak / CellCom antenna or splitter straight
cable connection .
Pin
Description
1 Tx+
2 Tx-
3* DECTSYNC+
4 Rx+
5 Rx-
6* DECTSYNC-
7* GND
8* 12V
Table 8: E1 pinout for connecting a FreeSpeak / CellCom antenna or splitter
Matrix 1 Pin Description
Matrix 2 Pin
1 To 1
2 To 2
3 Not connected 3
4 To 4
5 To 5
6 Not connected 6
7 Not connected 7
8 Not connected 8
Table 9: E1 to FreeSpeak / CellCom antenna or splitter straight cable connection
51 Eclipse HX-Omega User Guide