Clear-Com HX System Frames - Manual (Page 39)

y
5.5 Setting the matrix type
The Eclipse HX-Median, Eclipse HX-Omega and Eclipse HX-Delta matrices run common software,
which means that when you upgrade the application code for the CPU card, the CPU card cannot
automatically distinguish between the two matrix types. You must therefore set the matrix type in
EHX.
Note:
The Eclipse HX-PiCo runs its own matrix-specific software, and will always identify itself as an Eclipse
HX-PiCo on hardware discovery. There is therefore no requirement to set the matrix type for the
Eclipse HX-PiCo.
To set the matrix type:
1. In EHX, select Diagnostics > Event Log.
2. In the Matrix Event Log tab, Click the Play icon [ ].
3. Click Request info. In the dialog (see Figure 20: Setting the matrix type), enter the
following custom command:
Custom 145.1.12096. <2 == Eclipse HX-Median, 3 == Eclipse HX-Omega,
4 == Eclipse HX-Delta>
Click Send.
Figure 20: Setting the matrix type
32 Eclipse HX Upgrade Guide