2 changing the eclipse hx-pico ram, Changing the eclipse hx-pico ram – Clear-Com HX System Frames User Manual

Page 51

Advertising
background image

6.2 Changing the Eclipse HX-PiCo RAM

Important note:

When you change the Eclipse HX-PiCo RAM (from 128Mb RAM to 256Mb RAM), you must also
change the Eclipse HX-PiCo PROM. See
6.1 Changing the Eclipse HX-PiCo PROM above.

To change the Eclipse HX-PiCo RAM (from 128Mb to 256Mb):

1. Ensure that:

• The Eclipse HX-PiCo is powered off.

• You have the replacement 256Mb CPU card RAM daughter board to hand.

2. Remove the lid of the Eclipse HX-PiCo.

3. The cassette that holds the Eclipse HX-PiCo RAM daughter board is left of center on the main

board:

Figure 28: Eclipse HX-PiCo 128Mb RAM daughter board

To release the 128Mb RAM daughter board, push back the levers to either side of the
cassette. Remove the board.

44

Eclipse HX Upgrade Guide

Advertising
This manual is related to the following products: