Clear-Com Eclipse-PiCo - Manual (Page 24)

Clear-Com Communication Systems
Eclipse PiCo Matrix Instruction Manual
2 - 8
Note: To transfer data between two linked PiCo matrices using
the high-speed link the Ethernet ports must be connected
with either a cross-over shielded CAT-5 cable or a with a
hub or switch using conventional shielded CAT-5 cable.
CONNECTING TO A LOCAL AREA NETWORK
The RJ-45 socket labeled “LAN” connects a local area network (LAN)
to the Eclipse PiCo matrix through a standard Ethernet connection.
Note: If this port is used a ferrite must be added to the socket end
of each cable. A suitable ferrite is Würth Electronik part:
74271132.
Note: A shielded CAT-5 cable should be used.
7