Wiring to a computer, Wiring to a computer -17 – Clear-Com Eclipse-PiCo User Manual
Page 55
Advertising
Clear-Com Communication Systems
Eclipse PiCo Matrix Instruction Manual
4 - 1 7
WIRING TO A COMPUTER
The 3.5 mm connector on the PiCo unit’s front panel connects the
Eclipse PiCo matrix to an external computer. This connector is labeled
“RS-232.”
To connect a computer to the matrix, run cable from the PiCo’s
“RS-232” connector to the PC’s serial port. The maximum
recommended length of the cable is approximately 10 feet (3 meters).
Figure 4-14: Pinout for cable to connect PiCo matrix to external computer
pc connection (9-pin f)
pico connection (3.5 mm jack)
1
N/C
2
tip
3
ring
4
N/C
5
screen
6
N/C
7
N/C
8
N/C
9
N/C
Advertising