Clear-Com Eclipse-PiCo - Manual (Page 27)

Clear-Com Communication Systems
Eclipse PiCo Matrix Instruction Manual 3 - 3
Table 3-1: Port Functions
Note: Ports 33 through 36 do not show the chequered pattern to
indicate communications activity, but will light solidly to
indicate an online connection to the matrix. In addition, a
letter or number will appear on the display above these port
symbols to indicate port function.
ADJUSTING AUDIO LEVELS
Both incoming and outgoing audio levels can be adjusted for an audio
device (intercom panel, interface, and so on) connected to a PiCo port.
To adjust audio levels for a device connected to a PiCo port
1. From the Main menu, select AUDIO.
The Audio menu appears, as shown in Figure 3-4.
2. From the Audio menu, select either INPUTS or OUTPUTS.
From the Input Level menu the incoming volume level to a port can
be adjusted. From the Output Level menu the outgoing volume
level from a port can be adjusted.
Figure 3-4: Audio Menu
Figure 3-5: Input Level Menu
CODE DESCRIPTION
R 2-way radio
4 4-wire audio
P panel
N 4-wire network
trunk
T telephone
AUDIO MENU
INPUTS
EXIT
OUTPUTS
CLEAR TONES
INPUT LEVEL
PORT { 00 } [ ]
LEVEL { -0 } dB
EXIT