Clear-Com Eclipse-Omega - Manual (Page 138)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 2 8
• No Function
• Mic On/Off
• Mute Mic Output to Frame
• Mic Off (Momentary)
• Answerback Talk Clear
• Studio Announce
• Speaker Off
• PTT Activate all Talk Keys
• Activate Talk Switch 1
• Activate Talk Switch 2
• Activate Listen Labels
• PTT Activate Two Way Radio Talk Keys
• Select Route (and controls)
The default setting is No Function.
Applies to:
On V12LD, V24LD, V12PD, V24PD, V12RD, V24RD, V12LDD,
V12PDD, R12RDD, ICS 2003, ICS 102, i-Station, ICS 52, ICS 62 and
ICS 92 and 4000 Series II panels.
Note: Logic Inputs 3 and 4 are only available on V-Series panels.
Logic inputs 3 is pre-assigned to Reply Key. Logic input 4
is not currently used.
PANEL OPTIONS
Answerback Auto Clear Time
The time interval for automatic answerback in seconds. To adjust the
time select the answerback time to display the slider and set the time
as required. The time is settable from 0 to 60 seconds. The default is
10 seconds.
Display brightness
Sets the display brightness on panels that have a suitable display. To
adjust the display brightness select the brightness box to display the
adjustment slider and use the mouse to drag the slider to the required
setting. The brightness is adjustable from 0 to 10. The default setting
is 0.
Note: Not available on Concert panel.