Figure 12-19 installation completion -16 – Clear-Com Eclipse-Omega User Manual
Page 398
Advertising
Clear-Com
Eclipse Configuration Software Instruction Manual
1 2 - 1 6
Figure 12-19: Installation Completion
The default setting is to start ECS when the installer exits; to change
this click on the ‘Run Eclipse Configuration Software 5.2 now’ check
box to clear it before clicking the ‘Finish’ button to exit the installation.
Once the installation has completed ECS can be run and any saved
configurations can be imported (see Chapter 2).
Advertising
This manual is related to the following products: