Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 84)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 84
Customise A name (max. 16 alphanumeric characters) can be assigned to the
Titration Manager. This name will be displayed in the title bar of the
Main window.
If required, a maximum of 4 lines (32 characters) is available to enter
personal information, or your company’s address. This information will
appear as a header at the start of the report printout.
Enter in:
Setup menu > Customise
Date entry Enter current date in following format: dd:mm:yyyy.
Use the Up/Down arrow keys to jump to the month.
Enter in:
Setup menu > Configuration
Default
parameters Reset the parameters programmed in the method, reagent, or elec-
trode. Use this command to reset the preprogrammed methods, rea-
gents or electrodes to the Titration Manager’s default values.
Proceed as follows:
1. Display the Main, Reagent or Electrode window.
2. Press 4.
3. Select the method, reagent or electrode ID.
4. Press 3 Default parameters.
5. Press
✓ to confirm the reset.