INSTEON MorningLinc (2458A1) Manual - Manual (Page 3)

MorningLinc Owner’s Manual
Page 3 of 9 2458A1 - Rev: 1/21/2014 8:44 AM
Key MorningLinc Features
• Installs and links in minutes
• Locks or unlocks up to 15 Morning Industry RF deadbolts and door locks at the press of a button
• Links individual commands to On and Off buttons on INSTEON controllers
• Indicates INSTEON setup mode activity and operational states with a Status LED and beeper
• Stores setup state in non-volatile memory so settings aren’t lost during power outages
• Two-year warranty
What is Included with MorningLinc
• MorningLinc – INSTEON Morning Industry RF Doorknob/Deadbolt Controller
•
Quick Start Guide
INSTALLATION
Preparing to Install MorningLinc
CAUTION
Read and understand these instructions before installing and retain them for future reference.
MorningLinc is intended for installation in accordance with the National Electric Code and local
regulations in the United States or the Canadian Electrical Code and local regulations in Canada. Use
indoors only. MorningLinc is not designed nor approved for use on power lines other than 120V 60Hz,
single phase. Attempting to use MorningLinc on non-approved power lines may have hazardous
consequences.
Prior to installing MorningLinc, please review the entire installation procedure and take the following
precautions:
• Use indoors or in a properly insulated and weatherproof electrical box only
• Don’t plug MorningLinc into a filtered power strip or AC line filter
IMPORTANT! If you are have any questions, please call:
INSTEON Support Line - 800-762-7845