INTELLINET NETWORK 524995 Wireless 300N Dual-Band USB Adapter User Manual - Manual (Page 21)

Wireless Mode: Select the operation mode from the drop-down menu.
• 2.4G: The adapter can be operated in 802.11b/g/n wireless networks.
• 5G: The adapter can be operated in 802.11a/n wireless networks.
• 2.4 + 5G: The adapter can be operated in 802.11a/b/g/n wireless
networks.
Country Region Code: These values cannot be changed manually, as
they depend on your location.
Enable Tx Burst: Activate this option to accelerate the data transmit
rate. NOTE: This function may not work with all wireless access
points and wireless devices.
Enable TCP Window Size: Check this box to adjust the TCP window
size automatically for the best possible performance. It should be
safe for most of wireless environments; however, if you experience
problems with the wireless connection, you should disable the option.
Fast Roaming: Activate to control the threshold at which the adapter
should switch to another wireless access point with a better signal
quality. The adapter will fast roam when the receive sensitivity (signal
strength) is below the value entered. The lower the number entered,
the longer will the card stay connected to your current access point.
Enable CCX: This is Cisco Compatible Extensions, for radio monitoring
and fast roaming. This function is not available in Windows 7, and
you may not find the options described below on the interface of
your utility.
Turn on CCKM: During normal operation, LEAP-enabled client devices
CONFIGURATION
21