INTELLINET NETWORK 524995 Wireless 300N Dual-Band USB Adapter User Manual - Manual (Page 7)

INSTALLATION
3. Windows 7 will detect the new hardware and try to connect to the
Internet to download the latest driver. This may take a minute or so
depending on your Internet connection.
4. The installation is completed. You do not need to install any driver or
software from the installation CD.
This is the recommended method of installation for Windows 7. If this
procedure isn’t feasible (because your computer doesn’t have an Internet
connection, for example), install the driver from the installation CD (see
the Windows 7 quick installation guide on the CD for details).
FOR OPERATING SYSTEMS OTHER THAN WIN7
1. With your computer on, gently insert the
adapter into a USB port. NOTE: If the
adapter doesn’t easily slide into the port,
flip it over and try again.
2. The Welcome to the Found New Hardware
Wizard screen will display automatically.
Click “Cancel” to continue.
3. Insert the included setup CD and run the “autorun.exe” program. On
the main screen, click “Driver and WLAN Configuration Utility
7