INTELLINET NETWORK 524988 User Manual - Manual (Page 40)

40
SYSTEM & NETWORK SETUP
Enable Access Control — Select to enforce MAC address filtering. The router will
not filter the MAC addresses of wireless clients if this is left unchecked.
MAC Address — Enter the MAC addresses of your wireless devices here without
special characters. If the MAC address label of your wireless device indicates
“aa-bb-cc-dd-ee-ff” or “aa:bb:cc:dd:ee:ff,” just enter “aabbccddeeff” (without the
quote marks).
Comment — This is optional and can be left blank, but it’s recommended that you
enter something (such as “My Desktop,” as shown) that will help you identify an
address later.
Add — Click to add the MAC address and associated comment to the MAC Address
Filtering table.
Clear — Click to remove whatever you entered in the “MAC Address” or “Comment”
fields.
2.7.5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build a connection between
wireless network clients and this router. You don’t need to select an encryption
mode and input a long encryption passphrase every time you need to set up a
wireless client: You only need to press a button on a wireless device/client and
this wireless router, and the WPS will do the rest for you.