Avocent 416 User Manual
Page 20
14
AutoView 424 Installer/User Guide
Figure 2.3: Connecting Extended Access Sun Peripherals
4. Plug the ends of the 6-pin miniDIN VAK-1 keyboard/mouse adaptor into
the
and ports on your LongView receiver and then plug the Sun
keyboard/mouse cable into the VAK-1 adaptor.
5.
Connect the Category 5 cable to the modular jack on the rear of the receiver.
6.
Connect the circular power plug from the wall mount power supply to
the power port on the LongView receiver. Then plug the power supply
into a convenient electrical outlet. Verify that the receiver’s power LED is
now lit.
7.
If your extended access location utilizes Sun peripherals, you will need to
configure the AutoView 424 to recognize them before they can be used.
To do this:
a.
At the local user, activate the OSD by pressing either of the keyboard
Control keys twice within one second.
b. Press
the Control key twice more to access Administrator Commands.
c. Use
your
Arrow keys to highlight Administrator Functions and press Enter.
RECEIVER
LongView Receiver
VAK-1 Video
Adaptor
VAK-1 Keyboard/
Mouse Adaptor
Keyboard/Mouse
Connector
13W3 Video
Connector
Sun User Station