Setting up the on-screen display (osd) – Avocent 416 User Manual
Page 27
Chapter 3: Basic Operations
21
To select servers without displaying the OSD:
1.
Press and hold down the Num Lock key. Press and release the Minus (-)
key on the numeric keypad. Now release the Num Lock key. The Command
Line screen appears.
2.
Type the channel address of the computer you wish to access.
3. Press
Enter. For more information, see Keyboard Switching in this chapter.
Setting up the On-Screen Display (OSD)
All commands other than selecting servers are performed from the
Administrator Commands menu. If you are operating in non-secure mode or
are the system administrator, you will have several options that do not appear
in the user level Command menu. Add Channel, Edit Channel, Delete Channel,
Administrator Functions and Scanning are all covered in separate sections in
this chapter.
Figure 3.3: The Administrator Commands Menu