KT&C KPT-SPDN300NUCH - Manual (Page 24)

3. Program and Operation
3.5.5 Advanced Setup
Brightness increases as the number gets higher. The backlight compensation function provides
compensation by increasing the brightness of the overall screen so that subjects being shot with
a loss of dark detail due to backlight will have just the right brightness level.
Sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening
the edges in the picture.
- Enter into {Main Manu}
- Select {Camera Setup} and move to {Advanced Setup} using joystick[▶].
- Set sharpness level and brightness on/off
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.5.6 WDR/DNR Setup
When both high-brightness subjects and low-brightness subjects have been shot at the same
time, overexposure in the high-brightness subjects or loss of dark detail in the low-brightness
subjects may occur. The WDR (Wide Dynamic Range) function creates images free from over-
exposure or loss of dark detail by combining two images after tripping the shutter for a long
exposure time and for a short exposure time in one field.
- Enter into {Main Manu}.
- Select {Camera Setup} and move to {WDR/DNR} using joystick [▶].
- Set WDR/DNR for On/Off and a level in ‘On’ mode.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
24
ADVANCED SETUP
SHARPNESS : 10
BACKLIGHT : OFF
SAVE : OPEN
BACK : CLOSE
WDR/DNR
WDR SETUP : OFF
WDR LEVEL :
DNR SETUP : OFF
DNR LEVEL :
SAVE : OPEN
BACK : CLOSE