KT&C KPT-SPDN300NUCH - Manual (Page 28)

3. Program and Operation
The dome has maximum 210 preset positions. Each of the user-defined presets includes Pan/Tilt/
Zoom. Use the following steps to program {Preset}.
- Enter into {Main Manu}
- Select {Preset} and Move left or right to select Preset Number.
- Move the joystick right [▶] to edit a {Preset}
- Using the joystick, move to a desired target (Pan/Tilt/Zoom)
- Press [Near] button or use joystick to save settings.
- Press [Far] button or use joystick to return to previous menu {Preset Edit} (Back).
- To edit and clear the {Preset Title}, refer to Editing a Title section (3.2.1).
- It is possible to clear saved Preset No.xxx in the {Preset Setup Menu} individually.
- Set {Dwell Time} using the joystick [▶]
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.8 Pattern Menu
▲ /▼: move joystick up and down for selecting an item.
◀ /▶: move joystick left and right for moving an item.
▶ / [Open]/ [Near]: move joystick right to select or save settings or go to edit pages.
▶ / [Close]/ [Far]: move joystick to cancel or to exit current menu (Back).
A {Pattern} is to display (or recall) a memorized, repeated and serial trace of pan, tilt, zoom.
The dome has maximum 8 {Patterns}. Each of the user-defined scans includes Pan/Tilt/Zoom.
28
PRESET SETUP
PRESS MOVE KEY
SAVE : NEAR
BACK : FAR
PATTERN SETUP
NO.001 : NOT USED
EDIT :
TITLE :
TIME :
CLEAR
SAVE : OPEN
BACK : CLOSE