Main menu, Area label setup, Menu password setup – CNB SKB-21Z12F User Manual

Page 13

Advertising
background image

◎ The menu items surrounded with < > always has its sub menu.
◎ For all menu level, to go into sub menu, press NEAR key.

General Rules of Key Operation for Menu

DISPLAY SETUP

DISPLAY SETUP

C

O

◎ This menu defines Enable/Disable of OSD display on

Main Screen. If an item is set to be AUTO, the item is

◎ To go to up-one-level menu, press FAR key.
◎ To move from items to item in the menu, use joystick in the UP/DOWN or LEFT/RGHT.
◎ To change a value of an item, use UP/DOWN of the joystick in the controller.
◎ Press NEAR key to save values and Press FAR key to cancel values.

CAMERA ID
PTZ INFORMATION

BACK

ON
AUTO

LANGUAGE

ENGLISH

<AREA LABEL SETUP>

displayed only when the value of it is changed.

• CAMERA ID [ON/OFF]
• PTZ INFORMATION [ON/OFF/AUTO]
• LANGUAGE [ENGLISH/中文/Korean]

- Support English, Chinese, Korean.

• AREA LABEL SETUP

• SYSTEM INFORMATION

- Displays system information and configuration.

• DISPLAY SETUP

MAIN MENU

SPEED DOME CAMERA

<SYSTEM INFORMATION>
<DISPLAY SETUP>

EXIT

- Set LABEL name.

AREA LABEL SETUP

- Enable/Disable of OSD display on Main Screen.

• DOME CAMERA SETUP

- Configure various functions of this camera.

• SYSTEM INITIALIZE

- Initializes system configuration and sets all data to

factory default configuration.

<DISPLAY SETUP>
<DOME CAMERA SETUP>

<SYSTEM INITIALIZE>

EXIT

◎ This menu defines Label related settings.
• DISPLAY [AUTO/ON/OFF]
• CLEAR AREA LABEL

- Default LABEL settings.

• EDIT SCENE

Edit

AREA LABEL SETUP

DISPLAY AUTO
CLEAR AERA LABEL CANCEL
<EDIT SCENE>
<EDIT LABEL>

factory default configuration.

MENU PASSWORD SETUP

PASSWORD ENABLE [OFF/ON]

- Edit area.

• EDIT LABEL

- Edit LABEL.

※ Area setting can be configured rightward only and
Image Flip will be OFF. After setting IMAGE Flip will
return to the original status.

BACK
EXIT

MENU PASSWORD SETUP

PASSWORD ENABLE

<EDIT PASSWORD>

OFF

• PASSWORD ENABLE [OFF/ON]

- Displays Password protection enabled/disabled.

• EDIT PASSWORD

- Sets 0~8 digits password.

※ Factory default password is “11111111”. Failure to
correctly input password more than 5 times will display

24

25

BACK
EXIT

KEY CODE message. Please contact retailer for the lost
of password or KEY CODE message.

Advertising
This manual is related to the following products: