CNB IG1810PF - Manual (Page 16)

XNET Network Box Camera User’s Guide
5.1.3. Input User Name and Password
After fallowing the method which explained in Section 5.1.1. or 5.1.2, the login screen will open.
Input the User Name and Password in the login screen shown in Figure 5-2.
e and Password are ‘ root ’ and ‘ dw2001 ’, respectively. Click on
username and d of the Administrator, you must log on with the changed username and
Figure 5-2. Login screen
The default setting for the User Nam
“OK” button to enter into the Basic Setup page of Administrative Mode. If you have changed the
password.
passwor
If you forget t is by resetting the
unit to factory he settings go back
to default. In meters again. Please refer
to section 3.
the user name and password, the only way to reset i
default through the reset button. It will make all t
this case, you have to setup the network para
After login to t nd password for
security. Setup” for detailed
information.
he administrative mode, change the user name a
Please refer to section 5.6. “User Admin & Time
16 of
47