CNB BDS4812 (discontinued) - Manual (Page 24)

24
BDx-Series Installation
2.3 Installing Device Driver
Install the board in the PC, and boot the PC. Then, the PC will automatically detect the board
(by PNP) and will be ready to install the driver. The user can easily install the driver file saved
in the installation diskette or HDD by designating the folder classified according to the OS type.
After the driver file is installed, the IRQ of the installed card must not conflict or be
shared with another card or equipment. However, if the IRQ of the installed card is
shared by another card or equipment, insert the card into a different PCI slot or manually
specify the IRQ through CMOS setup of the main board.
Operating systems supporting the driver include Windows98SE, Windows 2000, and
windows XP .
Manufacturer guarantees the compatibility only with ATI-series video cards , not other
video cards.
Install the driver as described below:
2.3.1 BDF0303m / BDF0303 / BDS0606 / BDS1212 Driver
2.3.1.1 Windows XP/2000
Turn off the PC, and insert the board in the PCI slot. Turn on the PC, and run the system.
Windows XP/2000 will automatically detect the new hardware device and recognize it as a
multimedia video controller.
Select “Install from a list or specific location (Advanced)”, and click "Next>".